Refrigerant recovery unit

Refrigerant recovery unit

Refrigerant recovery unit

（can handle 514a with a tank that can hold 400 KG The power supply  380 V /3 Ph /60 Hz）

Model：CMR123-20

Compressor displacement：20m3/h

Liquid push and pull filling speed：980kg/h(For the measured data in the solar heating plant, from the ton bottle into the system)

Liquid push-pull recovery speed ：530kg/h(For the measured data in the solar heating plant, from the ton bottle into the system)

Push-pull theoretical velocity ≦2400kg/h(Internal diameter of the connection is greater than 3/4″)

Gas recovery rate (R245fa) :

≦78KG/H(Manometer pressure 1 bar)

≦34KG/H(Manometer pressure 0 bar)

≦18KG/H(Manometer pressure -0.4 bar)

≦12KG/H(Manometer pressure -0.6 bar)

≦4KG/H(Manometer pressure -0.9 bar)

Limiting vacuum -0.09 Mpa

Power：2HP

Power source :380V,3 PHASE,60HZ

Inspiratory pressure:-0.09~+0.15Mpa

Exhaust pressure :0-3bar

Inlet and outlet dimensions :3/4in 10m length of the flexible hose between the unit and the vessel

Suggestion:1. The cylinder must have 2 interfaces, gas and liquid

The refrigeration unit should also have two interfaces, a liquid phase port and a gas phase port

The liquid phase port of the unit must be at the lowest point, and the interface size of the unit is recommended not less than 3/4