mixer

Horizontal screw belt mixer

Device configuration
1. Model and specification
1.1 The full volume of the equipment is about 6000L.
1.2 The effective volume accounts for 40-60% of the total volume. 2. Equipment material
2.1 The body of the equipment is connected with 304 stainless steel, non-contact part Q235 carbon steel.
2.2 The standard parts used by the equipment shall retain their original materials. 3.The drive ability
3.1 Main motor adopts 37kW 380V-50HZ-4 level.
3.2 The main motor adopts jiangsu boneng common motor made in China.
3.3 The reducer shall be of Jiangsu Telong brand.
3.4 The output speed of the drive group is about 22 RPM/min. 4.Surface treatment
4.1 Fine polishing is done inside the equipment.
4.2 The outside of the equipment shall be brushed and the carbon steel part shall be sprayed with anti-rust paint.
5.Main dimensions
5.1 National standard 304 stainless steel plate with a barrel thickness of 6mm.
5.2 National standard 304 stainless steel plate with 4mm thickness of equipment barrel cover
5.2 Q235 carbon steel with a thickness of 16mm and a 2MM NATIONAL standard 304 stainless steel plate is lined at the end of the equipment.
6.Equipment sealed
6.1 The main shaft seal adopts packing + gas seal.

7.Open design
7.1 It is set up according to customers’ demand.

8.Discharge valve
8.1 Adopt pneumatic flap valve.

Control cabinet：1. The whole set of equipment is equipped with an independent control cabinet, which is made of carbon steel with plastic spray.
2. The control cabinet is in the form of button control, without touch screen.
3. The electrical components in the control cabinet are under the brand of Zhengtai. 4.All wires and cables shall be used by the customer.

others:1. All the equipment shall be powered on before feeding, and the equipment shall not be started with materials.
2. Equipment working environment: normal temperature and pressure.
3.The cable, air supply pipe and auxiliary equipment involved in the equipment shall be solved by the customer.
4.Equipment warranty period:15 months from the factory or 12 months from normal use, whichever comes first.
The machine shall be installed by the purchaser, and the seller shall provide telephone or E-mail instructions.