Injection molding machine
| SPECIFICATION | UNIT | YT-450A | |||
| INJECTION UNIT | Screw Diameter | mm | 28 | 32 | 36 |
| Injection Pressure | kgf/cm2 | 2170 | 1661 | 1312 | |
| Shot Volume(Theoratical) | cm3 | 73 | 96 | 122 | |
| Shot Weight | g | 66 | 87 | 109 | |
| oz | 2.3 | 3 | 3.8 | ||
| Injection Rate | cm3/sec | 41 | 53 | 68 | |
| Screw Stroke | mm | 120 | |||
| Temperature Section | – | 3+1 | |||
| CLAMP UNIT | Hopper Capacity | Liter | 15 | ||
| Clamping Force | tons | 45 | |||
| Plate Diameter | mm | 580*430 | |||
| Space between Tie Bars | mm | 405*255 | |||
| Min. Mould Height | mm | 150/190/210/250 | |||
| Opening Stroke | mm | 200 | |||
| Max. Mould Height | mm | 350/390/410/450 | |||
| Ejector Force | tons | 1.7 | |||
| Ejector Stroke | mm | 55 | |||
| OTHERS | System Pressure | kgf/cm2 | 140 | ||
| Oil Tank | liters | 207 | |||
| Pump Motor Power | kw | 5.5 | |||
| Heater Power | kw | 4.75 | |||
| Total Power | kw | 10.25 | |||
| Machine Weight | tons | 1.2 | |||
Configuration
1.Controller:Techmation(Taiwan)
2.Contractor:Schneider(France)
3.Screw&Barrel:Standard
4.Valve:YUKAN(Taiwan)
5.Scaler:Gefran(Italy)
6.Thermal protector:Schneider(France)
7.Circuit breaker:ZhengTai
8.Electromagnetic relay:Schneider(France)
9.Press button:Siemens
10.SSR:FORTEC(Taiwan)
11.Checking valves:Xutian(Taiwan)
12.Servo motor:Techmation(Taiwan)
13.Servo driver:Techmation(Taiwan)
14.Gear Pump:Settima (Italy)
Reviews
There are no reviews yet.