Injection molding machine
SPECIFICATION | UNIT | YT-450A | |||
INJECTION UNIT | Screw Diameter | mm | 28 | 32 | 36 |
Injection Pressure | kgf/cm2 | 2170 | 1661 | 1312 | |
Shot Volume(Theoratical) | cm3 | 73 | 96 | 122 | |
Shot Weight | g | 66 | 87 | 109 | |
oz | 2.3 | 3 | 3.8 | ||
Injection Rate | cm3/sec | 41 | 53 | 68 | |
Screw Stroke | mm | 120 | |||
Temperature Section | – | 3+1 | |||
CLAMP UNIT | Hopper Capacity | Liter | 15 | ||
Clamping Force | tons | 45 | |||
Plate Diameter | mm | 580*430 | |||
Space between Tie Bars | mm | 405*255 | |||
Min. Mould Height | mm | 150/190/210/250 | |||
Opening Stroke | mm | 200 | |||
Max. Mould Height | mm | 350/390/410/450 | |||
Ejector Force | tons | 1.7 | |||
Ejector Stroke | mm | 55 | |||
OTHERS | System Pressure | kgf/cm2 | 140 | ||
Oil Tank | liters | 207 | |||
Pump Motor Power | kw | 5.5 | |||
Heater Power | kw | 4.75 | |||
Total Power | kw | 10.25 | |||
Machine Weight | tons | 1.2 |
Configuration
1.Controller:Techmation(Taiwan)
2.Contractor:Schneider(France)
3.Screw&Barrel:Standard
4.Valve:YUKAN(Taiwan)
5.Scaler:Gefran(Italy)
6.Thermal protector:Schneider(France)
7.Circuit breaker:ZhengTai
8.Electromagnetic relay:Schneider(France)
9.Press button:Siemens
10.SSR:FORTEC(Taiwan)
11.Checking valves:Xutian(Taiwan)
12.Servo motor:Techmation(Taiwan)
13.Servo driver:Techmation(Taiwan)
14.Gear Pump:Settima (Italy)
Reviews
There are no reviews yet.