Elastic fabric production line

Production process:

Unwinding of upper and lower materials → active feeding → unwinding of elastic bars → spraying of upper and lower materials → composite of upper and lower materials and elastic bars → pressing device → active feeding → tension control → winding

Raw material: SMS fabric +D580 spandex + rubber rubber

2, design speed: 18m/min, stable production speed: 12m/min.

Capacity: Daily capacity of 10-12,000 square meters (24 hours), monthly capacity of about 300,000 square meters.
Instructions for rewinding and unwinding:

Air expansion diameter :φ76mm (3 in.) Maximum unwinding diameter :φ800mm

Maximum load: 200Kg Maximum winding diameter :φ800mm

Technical requirements:

(1) Material width 2400mm, maximum unwinding diameter :φ800mm

(2) Stable production speed: controllable within the range of 12m/min ~ 16m/min

Equipment parameters:
Power supply: 380V 50Hz
Air supply pressure:0.6-1.5Mpa (air source prepared by the demander)

3, installed capacity: 25KW (excluding glue machine, air compressor) (for reference only)

4, the main machine dimensions (length × width × height) : 9.0m×3.5m×2.8m (for reference only)

5, reasonable and firm square steel tube frame, steel plate 30mm thick, fixed frame with 100mm×100mm×6mm and 120mm×80mm×6mm standard square steel tube, with convenient maintenance, solid structure, strong seismic performance and other advantages

6, transmission mode: synchronous belt wheel synchronous belt link transmission mode, low transmission error, low noise, smooth operation.

Open book 7, systems and control, frequency conversion motor, constant tension automatic detection, high precision displacement sensor control, through PLC programmable computer information processing digital computing implement different base material in high speed running speed is the same, to ensure that different base material winding process of constant tension and stable transmission, in the flat after molding, products best effect.

8, rubber tendon to apply transmission servo control.

Rewinding and unwinding form: installation of air expansion shaft of single site material, fast and convenient, good operation performance;

Four, control system:

1, adopt Japan Mitsubishi PLC programmable control, Taiwan Weilun 10.5 inch touch screen man-machine dialogue system, all application functions and parameters set as one of the online operation, easy to operate, can be online to the running speed of the equipment,

2, servo motor 152J-2 sets.

352 j -2 sets

702 j – 1set

3, frequency conversion motor 6 set