wisdom Transpeed Solenoid testing machine

Wisdom Transpeed Solenoid testing machine

wisdom Transpeed Solenoid testing machine TEST MACHINE

Product Model: HT-JH23
1.Determine the location of the device,andthe size of the equipment 1330（width）×630（length）×1200（height）mm，reserving the distance to the left ,the right and the back side of the device,to release the heat；
2.The casters of the device can be adjusted, rotating the orange knob to adjust the support seat height.The equipment will not be able to move after the supporting seat is topped up , and can be move when it’s shrunk up.
3.equipment power specifications: three phase 380V.
4.Pull the power supply to the device location, there is need for a power box and a 25A or 32A three-phase circuit breaker (4P);
5.Prepare the power box to the equipment of the cable,specifications: three-phase four core,4 or 6 square mm cable (Multi Strand copper wire), cable length of the power box is determined by the distance to the equipment, the equipment needs 1 meter inside.
6.Instructions on the operation of the main power source.
7.Connect the power cord according to the diagram .After the power line is connected, using a multimeter to confirm the voltage between phases is correct, close switch after confirmed.
8. The earth wire should be connected to some reliable grounding outside the equipment, or there will be static.
9.Note: Please cut off the power supply when connecting!
14. Direct refuel From test bin；
15.Test oil specification:DEX III above specifications.
16.Specific filling amount is according to the icon position;
17.The total amount of filling is about 16L
18.It need to check whether it is in the correct direction of rotation the direction of rotation of the oil pump motor is correct in the first start-up. When the rotation direction is not corre,there will be no hydraulic system in the hydraulic system.